41 | CF_RESETX | CF reset | IN |
42 | CF_IORDY | CF ready input - output | IN/OUT |
43 | CF_INPACKX | Not used | IN |
44 | VCC(CF_REGX) | CF register select | OUT |
45 | CF_DASPX | Not used | - |
46 | CF_PDIAGX | Not used | - |
47 | CF_D8 | CF 16 bit data bus | IN/OUT |
48 | CF_D9 | CF 16 bit data bus | IN/OUT |
49 | CF_D10 | CF 16 bit data bus | IN/OUT |
50 | GND | CF logic ground | - |
51 | PEG(FGND) | Not used | - |
52 | PEG(FGND) | Not used | - |
J4 (Digital Camera Connector) |
|
| |
No. | Signal name | Function | Input / Output |
1 | DSC_VBUS | PictBridge VBUS power supply | OUT |
2 | DSC D- | Camera Direct D- signal | IN/OUT |
3 | DSC D+ | Camera Direct D+ signal | IN/OUT |
4 | DSC_SGND | Ground | - |
5 to 8 | DSC_FGND | Ground | - |
J5 (IrDA Board) |
|
|
|
No. | Signal name | Function | Input / Output |
1 | Ir_3.3V | Logic power supply | OUT |
2 | Ir_RXD | IrDA reception signal | IN |
3 | Ir_TXD | IrDA reception signal | OUT |
4 | Ir_GND | Ground | - |
5 | Ir_FGND | Ground | - |
J301 (Memory Card Board) |
|
| |
No. | Signal name | Function | Input / Output |
1 | Ir_3.3V | Logic power supply | IN |
2 | Ir_RXD | IrDA reception signal | OUT |
3 | Ir_TXD | IrDA reception signal | IN |
4 | Ir_GND | Ground | - |
5 | Ir_FGND | Ground | - |
To the table of contents |
| To the top | |
<Part 3: 2. CONNECTOR LOCATION AND PIN LAYOUT; 
