Polaroid MAXXUM HTsi Taking Pictures in FULL-AUTO, Focus Signals, Focus is confirmed

TAKING PICTURES IN FULL-AUTO

1. Slide the main switch to ON.

2. Press the program-reset button to set the camera to Full-Auto.

• The camera will return to its default settings (p77).

3. If using a zoom lens, rotate the lens’ zooming ring to frame the subject as desired.

4.Center your subject in the focus frame [ ], then press

the shutter-release button partway down to activate autofocus.

• or will appear in the viewfinder when focus is confirmed.

•The built-in flash will pop-up and fire when necessary.

TAKING PICTURES IN FULL-AUTO

5. Press the shutter-release button all the way down to take the picture.

• In low-light conditions, the AF illuminator (flash) will fire to determine focus distance.

• Use focus hold (p23) if your subject is outside the focus frame.

Focus Signals

The following signals appear in the viewfinder to indicate the focus status when the shutter release button is pressed partway down.

Focus is confirmed

Continuous autofocus – Focus is confirmed

Continuous autofocus – Lens focusing

Shutter is locked

Focus cannot be confirmed – Shutter is locked. Subject is too close or is one of the special focus situations described on page 22.

20 21