Polaroid MAXXUM HTsi Setting the Custom Functions, Cust 1 AF Release Priority

CUSTOM FUNCTIONS

Using the custom functions, you can tailor selected camera settings to suit your shooting style or preferences. The functions you can customize are explained on pages 71-75.

Setting the Custom Functions

1. Turn the function dial to CUST.

2. Turn the control dial to select the number of the custom function you want to change.

3. Press the function button and turn the control dial to select the desired setting.

4. Turn the function dial to any position other than CUST.

• The shutter cannot be released if the function dial is set to CUST.

To reset all of the custom functions to their default setting (1) …

1.Slide the main switch to LOCK.

2.Turn the function dial to CUST.

3.Press the function button and slide the main

switch from LOCK to ON.

• will blink in the data panel.

CUSTOM FUNCTIONS

Cust 1 – AF Release Priority

1 – AF priority

Shutter will not release until or appears in the viewfinder.

2 – Release Priority

Shutter releases even if the focus cannot be confirmed. Use Release priority when photographing moving subjects.

•When continuous-advance mode is selected, the camera will not update the focus while the shutter-release button is pressed.

Cust 2 – Film Rewind Start

1 – Automatic

Film is automatically rewound at the end of the roll.

2 – Manual

Press the manual-rewind button to initiate rewind. (p28).

Cust 3 – Film Tip

1 – Film is completely rewound into the cartridge.

2 – Leader is left out of the cartridge after rewind.

• Sliding the main switch to LOCK during rewind causes the film to be rewound into the cartridge when the power is switched back on.

70 71