Cust 7 Spot AF button | Polaroid MAXXUM HTsi guide

CUSTOM FUNCTIONS

Cust 7 – Spot AF button

1 – Spot Focus

Press the Spot AF button to lock the focus using the center focus sensor (p52).

CUSTOM FUNCTIONS

Cust 8 – Spot/AE Lock button

1 – Press to activate

Spot area is used for metering until the spot button is released.

2 – Press once to activate, press again to cancel.

Spot metering area is used for metering until the spot/AE lock button is pressed again.

• Slow-shutter sync is set when the flash is selected.

2 – Selectable focus area

Press the Spot AF button and turn the control dial to specify the desired local focus area.

•The selected focus area is displayed in the viewfinder data panel.

•The focus area remains selected until it is

changed or CUSt – 7 is returned to	Local Focus Area Locations
setting 1.

•When the RF 500mm lens or the AF Power Zoom 35-80mm lens is attached, only the center local focus area can be selected.

The sequence is:

Wide focus area

Left local focus area

Right local focus area

Center spot focus area

Cust 9 – AF Illuminator (built-in flash)

1 – AF IIluminator on

When the built-in flash is up, its AF illuminator will fire when necessary to assist focus.

• The AF illuminator does not fire when flash cancel ( ) in selected.

2 – AF Illuminator cancelled

The built-in flash’s AF illuminator will not fire. Other flash functions will operate normally.

• An attached accessory flash’s AF illuminator will not be cancelled.

74

75

Image 39

Polaroid MAXXUM HTsi Cust 7 Spot AF button, Cust 8 Spot/AE Lock button, Cust 9 AF Illuminator built-in flash

Contents

Page For Proper and Safe USE V E L I I Table of Contents Body Names of Parts Viewfinder Data Panel Quick Operation Attaching the Strap Level Installing the Batteries Checking Battery PowerBatteries Lens Attaching the LensRemoving the Lens Loading Film Extend the leader between the guide rails to the index markClose the back cover Handling the Camera Holding the CameraPressing the Shutter-Release Button Focus Signals Taking Pictures in FULL-AUTOFocus is confirmed Focus Hold Special Focus Situations Flash Range Using the BUILT-IN FlashFlash Signals Lens Shadowing Red-Eye Reduction Flash CancelCancelling Red-eye Reduction Fill Flash Wait until the film is completely rewound Rewinding the FilmAutomatic Rewind Manual Rewind Tips Portrait ModeLandscape Mode Subject Program Selection Sports Mode Close-Up Mode Appears in the data panel Night Portrait ModePhotographing Night Scenes Turn the control dial until Continuous Advance Mode SELF-TIMER Mode Aperture Priority Press the flash-mode button to pop-up the built-in flash Mode FlashCancelling the Flash Aperture Control Push the built-in flash down or turn the accessory flash off Mode Shutter Priority Mode Manual Shutter ControlFast Shutter Speed Slow Shutter Speed Metering in Manual Mode Taking Time Exposures buLb Firmly press the eyepiece cap into the eyepiecePress and hold the shutter- release button to take Picture Focus Wide Focus Area D I T I O N a L A T U R E S AF Power Zoom and xi-Series Lenses Focus Spot AFFocus Manual Focus Exposure 14 Segment Metering Focus AF Illuminator Exposure Exposure Compensation Exposure Spot Metering Exposure Bracketing Exposure Setting the ISO Manually Bracketing with Exposure Compensation Button Cancelling BracketingSelect the desired drive mode Flash Notes Exposure Multiple Exposure Cancelling Multiple Exposure Compensate the exposures as follows Attach the 5400HS flash and set it to standard modeFlash High-Speed Sync Metering Multiple Exposures Slow-shutter Sync Press the Mode button to choose the data imprinting formatFlash Slow Sync Exposing the Date/Time For Owners of the Quartz Date Model Setting the Date/TimeReplacing the Battery Replace the battery cover, then reset the date and time Cust 2 Film Rewind Start Setting the Custom FunctionsCustom Functions Cust 1 AF Release Priority Cust 5 Flash Control in P Mode Cust 4 DX MemoryCust 6 Focus-hold button Lens Cust 7 Spot AF button Cust 8 Spot/AE Lock buttonCust 9 AF Illuminator built-in flash P E N D I Program Reset Button Accessory Information Compatibility of AccessoriesAccessory Flash Control Lens Hood Lens SpecificationsExposure Warnings For owners of the optional lens kits Problem Trouble Shooting Operating Temp and Conditions Care and Storage Specifications Page 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan