Polaroid MAXXUM HTsi instruction manual Mode Shutter Priority

S-MODE – SHUTTER PRIORITY

In S-mode, you select the shutter speed and the camera automatically sets the aperture required for proper exposure. Use S-mode when you want to control the blur caused by subject movement.

1. Turn the function dial to .

2. Press the function button and

turn the control dial until S appears in the data panel.

3. Turn the control dial to select the shutter speed.

• The number 60, or 125, displayed in the data panel stands for 1/60th or 1/125th of a second.

• The seconds indicator appears in the viewfinder and data panel if the shutter speed is one second or longer.

If the aperture display in the data panel blinks, the required setting is outside the aperture range of the lens. Turn the control dial until the blinking stops.

S-MODE – SHUTTER PRIORITY

S-Mode Flash

When the built-in flash is up or an attached accessory flash is on, it will fire each time a picture is taken. Flash exposure is controlled by the camera’s TTL automatic flash metering system.

1. Press the flash-mode button to pop-up the built-in flash.

• will appear in the data panel.

2. Turn the control dial to select any shutter speed up to 1/125th of a second.

•The camera automatically sets the aperture for the selected shutter speed.

Cancelling the Flash

Push the built-in flash down or turn the accessory flash off.

• will be displayed in the data panel.

42 43