Polaroid MAXXUM HTsi instruction manual Installing the Batteries, Checking Battery Power

BATTERIES

Installing the Batteries

Your camera uses two 3V CR2 lithium batteries to supply power for all camera operations.

1. Using a coin or similar object, turn the battery- chamber lock to OPEN, then open the battery-chamber door.

2. Insert the batteries as indicated by the + and – marks.

3. Close the battery-chamber door, then turn the battery- chamber lock to CLOSE.

• Setting the camera down with the battery- chamber door open may damage the camera.

BATTERIES

Checking Battery Power

Each time the main switch is set to ON, a battery symbol appears in the data panel indicating the power status of the batteries.

Full-battery symbol

Power is sufficient for all camera operations.

• will only appear for five seconds.

Blinking low-battery symbol

Power is extremely low. All functions are operational, but the batteries will need to be replaced soon. Flash recycling time may be slow.

Blinking low-battery symbol appears alone and the shutter locks.

Power is insufficient for camera operation. Replace the batteries.

No display

Power is too low for the camera to operate. Replace the batteries or make sure they have been inserted correctly.

12 13