FOR OWNERS OF THE QUARTZ DATE MODEL
Setting the Date/Time
1. Press the MODE button to choose the data imprinting format.
• M will appear above the month.
2. Use the SELECT button to move
between different parts of the displayed data.
• The selected part will blink, indicating that it is the data to be changed.
3. Press the ADJUST button to change the data to the correct value.
• Data continues changing as long as the button is held down.
• In time mode, pressing the ADJUST button while
:is blinking resets the seconds counter to zero (not shown).
4. When all data is correct, press the SELECT button until the data stops blinking.
FOR OWNERS OF THE QUARTZ DATE MODEL
Replacing the Battery
The quartz data back uses a CR2025 lithium battery, located on the inside of the back cover. Replace the battery if the display changes or becomes dim while the camera batteries are removed.
1. Open the back cover.
2. Using a coin or similar object, turn the battery cover
3. Remove the old battery and replace it with a new one.
• The + side should face up.
4.Replace the battery cover, then reset the date and time.
68 | 69 |
