Polaroid MAXXUM HTsi instruction manual Exposure Setting the ISO Manually, Exposure Bracketing

EXPOSURE – Setting the ISO Manually

Set the film speed manually when you want to override the DX-coded film speed or when using non-DX-coded film. Film speeds can be set from ISO 6 to 6400 in 1/3EV increments.

Film must be loaded before the ISO can be changed.

1. Turn the function dial to ISO.

2. Press the function button and turn the control dial until the desired ISO value appears in the data panel.

EXPOSURE – Bracketing

Metered Exposure 1/2 Stop Under 1/2 Stop Over

This function automatically exposes a 3 frame 1/2 stop increment bracketed series. The order of the exposures will be the metered exposure, 1/2-stop under the metered exposure, 1/2 stop over the metered exposure.

• The automatic bracketing feature cannot bracket flash exposures.

This effect is most visible when slide film is being used.

1. Turn the function dial to .

2. Press the function button and turn the control dial until appears in the data panel.

• appears in the frame counter after the function button is released.

Continued on next page.

58 59