Pioneer VSX-819H Italiano Nederlands Español 39, Listening to your system, English, Setting, Hdmi

Listening to your system 05

Setting	What it does
DRC	Adjusts the level of dynamic range for movie soundtracks
(Dynamic Range	optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby
Control)	TrueHD, DTS-HD and DTS-HD Master Audio (you may
	need to use this feature when listening to surround sound
	at low volumes).

Option(s)

AUTOe

MAX

MID

OFF

English

LFE ATT	Some Dolby Digital and DTS audio sources include ultra-
(LFE Attenuate)	low bass tones. Set the LFE attenuator as necessary to
	prevent the ultra-low bass tones from distorting the sound
	from the speakers.
	The LFE is not limited when set to 0 dB, which is the
	recommended value. When set to –10 dB, the LFE is
	limited by the respective degree. When OFF is selected, no
	sound is output from the LFE channel.

LFEATT 0 (0 dB)

LFEATT 10 (–10 dB)/

LFEATT ** (OFF)

Deutsch Français

HDMI	Specifies the routing of the HDMI audio signal out of this	AMP
(HDMI Audio)	receiver (amp) or through to a TV or flat panel TV. When
		THRU
	THRU is selected, no sound is output from this receiver.
A.DLY	This feature automatically corrects the audio-to-video delay	OFF
(Auto Delay)	between components connected with an HDMI cable. The
		ON
	audio delay time is set depending on the operational status
	of the display connected with an HDMI cable. The video
	delay time is automatically adjusted according to the audio
	delay time.f
C.WIDTHg	Spreads the center channel between the front right and left	0 to 7
(Center Width)	speakers, making it sound wider (higher settings) or	Default: 3
(Applicable only when	narrower (lower settings).
using a center speaker)
DIMEN.g	Adjusts the surround sound balance from front to back,	–3 to +3
(Dimension)	making the sound more distant (minus settings), or more	Default: 0
	forward (positive settings).
PNRM.g	Extends the front stereo image to include surround	OFF
(Panorama)	speakers for a ‘wraparound’ effect.
		ON
C.IMGh	Adjust the center image to create a wider stereo effect with	0 to 10
(Center image)	vocals. Adjust the effect from 0 (all center channel sent to front	Default: 3
(Applicable only when	right and left speakers) to 10 (center channel sent to the center	(NEO:6 MUSIC),
using a center speaker)	speaker only).	10 (NEO:6 CINEMA)

a.You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.

b.You can change the Sound Retriever feature at any time by using S.RETRIEVER button.

c.WMA and MP3 playback available only via iPod/USB input.

d.This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

e.The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD.

f.This feature is only available when the connected display supports the automatic audio/video synchronizing capability (‘lip-sync’) for HDMI. If you find the automatically set delay time unsuitable, set A.DLY to OFF and adjust the delay time manually. For more details about the lip-sync feature of your display, contact the manufacturer directly.

g.Only available with 2-channel sources in DOLBY PLII MUSIC mode.

h.Only when listening to 2-channel sources in NEO:6 CINEMA and NEO:6 MUSIC mode.

Italiano Nederlands Español

39

En