Pioneer VSX-819H-K manual Connecting your USB device to the receiver, Basic playback controls

Other connections 11

•Push down on the PUSH OPEN tab to access the USB terminal.

		iPod		VIDEO INPUT
		USB	VIDEO	L AUDIO R
SPEAKERS	MULTI-ZONE			MASTER
	CONTROL	ON/OFF		VOLUME
	iPod	VIDEO INPUT
	USB	VIDEO	L AUDIO R
				MCACC
				SETUP MIC

This receiver

USB mass storage device

Connecting your USB device to the receiver

1Switch on the receiver and your TV.

2Press iPod USB on the remote control to switch the receiver to the iPod USB.

NO DEVICE appears in the OSD.

3Connect your USB device.1

The USB terminal is located on the front panel.

Loading appears in the OSD as this receiver starts recognizing the USB device connected. After the recognition, a playback screen appears

in the OSD and playback starts automatically.2

Basic playback controls

The following table shows the basic controls on the remote for USB playback. Press iPod USB to switch the remote control to the iPod USB operation mode.

Button What it does

Starts normal playback.

Pauses/unpauses playback.

/	Press to skip to previous/next track.
/ Press and hold during playback to
	start scanning.
	Press repeatedly to switch between
	Repeat Folder, Repeat One and
	Repeat All.
	Press repeatedly to switch between
	Shuffle On and Shuffle Off.
DISPLAY	Press repeatedly to change the song
	playback information displayed in the
	front panel display.
/	During playback, press to skip to
/	previous/next track.

TOP MENU Press to return to the menu screen.

RETURN Press to return to the previous level.

Important

If a USB Error message lights in the display, try following the points below:

• Switch the receiver off, then on again.

• Reconnect the USB device with the

English Deutsch Français Italiano Nederlands Español

USB PLAY 001/004

MP3R:Fld S:On

R e l a x Yo u r B o dy Kev i n J a ck s o n

We a r e a l l o n e

 32kbps	0:01
	Return

File/Folder number

File format

Repeat or Shuffle

Song name Artist name

Album name

Elapsed time

Bit rates

receiver switched off.

• Select another input source (like BD), then

switch back to iPod USB.

• Use a dedicated AC adapter (supplied with

the device) for USB power.

For more information on error messages, see USB messages on page 68.

If this doesn’t remedy the problem, it is likely your USB device is incompatible.

Note

1Make sure the receiver is in standby when disconnecting the USB device.

2• If the file selected cannot be played back, this receiver automatically skips to the next file playable.

•When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead; when neither the album name nor the artist name is present, the row is displayed as a blank space.

•Note that non-roman characters in the playlist are displayed as *.

•It is not possible to output the USB audio to ZONE 2.

61

En