Pioneer VSX-819H-K manual The System Setup menu

The System Setup menu 06

1Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use /// and ENTER on the remote

control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign

Return

2Select ‘Input Assign’ from the System Setup menu.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign

Return

3Select ‘Component Input’ from the Input Assign menu.

3.Input Assign			3a.Component	Input
			Component–1
	a.Component Input				BD
			Component–2	[	TV	]
		Return			Return

4Select the number of the component

video input to which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs on the rear of the receiver.

5Select the component that corresponds with the one you connected to that input. Select between BD, TV, DVR, MULTI (MULTI CH IN) or OFF.

•Use / and ENTER to do this.

•If you assign a component input to a certain function, any component inputs previously assigned to that function will automatically be switched off.

•Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver.

•If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver’s COMPONENT VIDEO OUT output (down converting component video is not possible after assigning an input).

6When you’re finished, press RETURN. You return to the Input Assign menu.

English Deutsch Français Italiano Nederlands Español

45

En