Pioneer VSX-819H-K 06The System Setup menu, Speaker Setting, Select ‘Manual SP Setup’ then press

06The System Setup menu

1 Select ‘Manual SP Setup’ then press				1 Select ‘Speaker Setting’ from the
ENTER.				Manual SP Setup menu.
System Setup		2.Manual SP Setup		2.Manual SP Setup		2a.Speaker Setting
	1.Auto MCACC		a.Speaker Setting		a.Speaker Setting	Front		SMALL
	2.Manual SP Setup		b.Crossover Network		b.Crossover Network	Center	[	SMALL ]
	3.Input Assign		c.Channel Level		c.Channel Level	Surr	[	SMALL ]
			d.Speaker Distance		d.Speaker Distance	Surr. Back	[	NO ]
						Subwoofer:		YES
	Return		Return		Return			Return

2Select the setting you want to adjust. If you are doing this for the first time, you may want to adjust these settings in order:

•Speaker Setting – Specify the size and number of speakers you’ve connected (see below).

•Crossover Network – Specify which frequencies will be sent to the subwoofer (page 43).

•Channel Level – Adjust the overall balance of your speaker system (page 43).

•Speaker Distance – Specify the distance of your speakers from the listening position (page 44).

3Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

Speaker Setting

Use this setting to specify your speaker configuration (size, number of speakers). It is a good idea to make sure that the settings made in Automatically setting up for surround sound (MCACC) on page 9 are correct.

2Choose the set of speakers that you

want to set then select a speaker size. Use / to select the size (and number) of each of the following speakers:

•Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a

subwoofer. Select SMALL to send the bass frequencies to the subwoofer.1

•Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers).

•Surr – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect surround speakers choose NO (the sound of the surround channels is sent to the other speakers).

Note

1If you select SMALL for the front speakers, the subwoofer will automatically be fixed to YES. Also, the center, surround and surround back speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.

42

En