Pioneer VSX-819H Using the tuner, Listening to station presets, Naming preset stations, Deutsch

Using the tuner

3Press PRESET / to select the station preset you want.

You can also use the number buttons.

4Press ENTER.

After pressing ENTER, the preset number stop blinking and the receiver stores the station.

Listening to station presets

You will need to have some presets stored to do this. See Saving station presets on page 48 if you haven’t done this already.

1Press PRESET / to select the station preset you want.

•You can also use the number buttons on the remote control to recall the station preset.

Naming preset stations

For easier identification, you can name all of your preset stations.

1Choose the station preset you want to name.

See Listening to station presets above for how to do this.

2Press TUNER EDIT twice.

The cursor at the first character position is blinking on the display.

3 Input the name you want.

Choose a name up to eight characters long.

•Use the PRESET / buttons to select character position.

•Use the TUNE / buttons to select characters.

•The name is stored when ENTER is pressed.

Tip

•To erase a station name, follow steps 1 and 2, and press ENTER while the display is blank. Press TUNER EDIT while the display is blank, to keep the previous name.

08

• Once you have named a station preset,
Press DISPLAY to show the name. When	English
you want to return to the frequency
display, press DISPLAY several times to
show the frequency.
	Deutsch
	Français
	Italiano
	Nederlands
	Español

49

En