Pioneer VSX-819H manual Using the MULTI-ZONEfeature, Using the MULTI-ZONEcontrols, English Deutsch

Using the MULTI-ZONE feature 07

Using the MULTI-ZONE controls

The following steps use the front panel controls to select sources. See MULTI-ZONE remote controls below.

AUDIO/ VIDEO MULTI- CHANNEL RECEIVER VSX–819H

– + – +

•If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets on page 48 if you’re unsure how to do this).2 If you select SIRIUS, you can only switch between PRESET modes.

4 When you’re finished, press CONTROL

again to return to the main zone controls.

You can also press the MULTI-ZONE ON/OFF

button on the front panel to switch off all

English Deutsch

SPEAKERS

MULTI-ZONE

CONTROL ON/OFF

1Press the MULTI-ZONE ON/OFF button on the front panel.

Each press selects a MULTI-ZONE option:

•ZONE 2 ON – Switches the MULTI-ZONE feature on

•ZONE 2 OFF – Switches the MULTI-ZONE feature off

The ZONE indicator lights when the MULTI- ZONE control has been switched ON.

2Press CONTROL.

•When the receiver is on,1 make sure that any operations for the sub zone are done while ZONE 2 shows in the display. If this is not showing, the front panel controls affect the main zone only.

3Use the INPUT SELECTOR dial to select the source for the zone you have selected. For example, Z2: CDR sends the source connected to the CDR inputs to the sub room (ZONE 2).

output to the sub zone.3

MULTI-ZONE remote controls

Press the RECEIVER button on the remote control, then with the SHIFT button pressed, press the buttons below to operate the corresponding zone.

The following table shows the possible MULTI- ZONE remote controls:

Button	What it does
ZONE 2	Switches on/off power in the sub zone.
ON/OFFa
INPUT	Use to select the input source in the
SELECT	sub zone.
MULTI	Use to select the input source directly
CONTROL	in the sub zone.
buttons

a.Without pressing the SHIFT button, you can switch power on/off in the sub zone.

Français Italiano Nederlands Español

Note

1If the receiver is in standby, the display is dimmed, and ZONE2 ON continues to show in the display.

2The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.

3• You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

•If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this receiver is in standby.

•Volume level cannot be adjusted with this receiver. Use the separate amplifier connected to the ZONE2 OUT to adjust the volume.

47

En