6. While pushing on the back of the drive, remove the Media Card Reader by sliding and holding the drive latch release downward.
7. Replace the drive panel.
8. Replace the computer cover.
Installing a Media Card Reader
1. Follow the procedures in "Before you Begin."
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3. Remove the computer cover.
4. Remove the drive panel.
1
sliding plate lever
2
sliding plate
3
Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1
Media Card Reader
2
screw (3)