Removing a CD/DVD Drive | Dell DCSM specs

5.Remove the Media Card Reader and bracket from its packaging.

6.Ensure that the Media Card Reader is installed before the FlexBay USB cable is connected.

NOTE: Connect the USB cable on the back of the Media Card Reader to the front panel USB connector on the system board.

7. Make sure the FlexBay USB cable is connected to the back of the Media Card Reader.

1Media Card Reader

2FlexBay cables

8.Insert the Media Card Reader by sliding and holding the drive latch release downward. Then, slide the drive in to seat it in the computer.

9.Route the USB cable through the cable routing clip.

10.Replace the computer cover.

CD/DVD Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

Removing a CD/DVD Drive

1.Follow the procedures in "Before you Begin."

2.Remove the computer cover.

3.Remove the drive panel.

4.Disconnect the power and data cables from the back of the drive.

Image 33

Dell DCSM specifications Removing a CD/DVD Drive

Contents

Abbreviations and Acronyms Front View of Computer About Your Dell Dimension 5000 Computer Lights Back View of Computer Back to Contents Dell Diagnostics Advanced TroubleshootingWhen to Use the Dell Diagnostics Starting the Dell Diagnostics From Your Hard Drive Power Light Problem Description Suggested Resolution Dell Diagnostics Main MenuSystem Lights Option Function Light Pattern Problem Description Suggested Resolution Diagnostic Lights Code Cause Beep Codes Back to Contents Getting Started Before You BeginRecommended Tools Turning Off Your Computer Back to Contents Replacing the Computer Cover Removing the Computer Cover Removing and Installing Parts MemoryDDR2 Memory Overview Installing Memory Addressing Memory With 4-GB Configurations Cards Removing MemoryPCI Cards Installing a PCI Card Removing a PCI Card PCI Express Cards Installing a PCI Express CardPage Removing a PCI Express Card Removing the Drive Panel Drive Panels Removing the Drive-Panel Insert Replacing the Drive-Panel InsertReplacing the Drive Panel Drives Drive Interface Connectors Connecting Drive CablesPower Cable Connector Connecting and Disconnecting Drive Cables Removing a Hard Drive Hard Drive Adding a Second Hard Drive Installing a Hard Drive Removing a Floppy Drive Floppy Drive Installing a Floppy Drive Replace the computer cover Removing a Media Card Reader Media Card Reader Remove the computer cover Installing a Media Card Reader Removing a CD/DVD Drive CD/DVD Drive Installing a CD/DVD Drive Replace the computer cover Removing the Processor Processor Installing the Processor System Board Jumper Settings Jumper Setting DescriptionRemoving the System Board Power Supply Removing the Power SupplyReplacing the System Board Replacing the Power Supply Replacing the Battery Battery Specifications Connectors DrivesControls and Lights Power PhysicalEnvironmental Entering System Setup System SetupSystem Setup Screens Overview PXE. When the On w/ PXE setting is active System Setup OptionsUSB, Internal, or Read Only COM3 Are every day or every Monday through Friday System Password option Option Settings Boot SequenceChanging Boot Sequence for the Current Boot Changing Boot Sequence for Future Boots Clearing Cmos Settings Clearing Forgotten Passwords Back to Contents Inside View of Your Computer System Board Components Technical Overview DC Power Connector P1 Power Supply DC Connector Pin Assignments COM Pin Number Signal Name 18-AWG Wire Abbreviations and Acronyms