Replace the computer cover | Dell DCSM manual

NOTE: If you are installing a new CD/DVD drive rather than replacing a drive, remove the drive panel inserts and slide the drive into place. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

1drive

2screw (3)

4.Connect the power and data cables to the drive.

1data cable

2power cable

5.Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

6.Replace the computer cover.

7.Replace the drive panel.

NOTICE: To connect a network cable, first plug the cable in to the network device and then plug the cable in to the computer.

8.Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

9.Enter system setup and select the appropriate Drive option.

Image 35

Dell DCSM specifications Replace the computer cover

Contents

Abbreviations and Acronyms Front View of Computer About Your Dell Dimension 5000 Computer Lights Back View of Computer Back to Contents Starting the Dell Diagnostics From Your Hard Drive Advanced TroubleshootingDell Diagnostics When to Use the Dell Diagnostics Option Function Dell Diagnostics Main MenuPower Light Problem Description Suggested Resolution System Lights Light Pattern Problem Description Suggested Resolution Diagnostic Lights Code Cause Beep Codes Back to Contents Turning Off Your Computer Before You BeginGetting Started Recommended Tools Back to Contents Replacing the Computer Cover Removing the Computer Cover DDR2 Memory Overview Removing and Installing PartsMemory Installing Memory Addressing Memory With 4-GB Configurations PCI Cards CardsRemoving Memory Installing a PCI Card Removing a PCI Card PCI Express Cards Installing a PCI Express CardPage Removing a PCI Express Card Removing the Drive Panel Drive Panels Replacing the Drive Panel Removing the Drive-Panel InsertReplacing the Drive-Panel Insert Drives Connecting and Disconnecting Drive Cables Connecting Drive CablesDrive Interface Connectors Power Cable Connector Removing a Hard Drive Hard Drive Adding a Second Hard Drive Installing a Hard Drive Removing a Floppy Drive Floppy Drive Installing a Floppy Drive Replace the computer cover Removing a Media Card Reader Media Card Reader Remove the computer cover Installing a Media Card Reader Removing a CD/DVD Drive CD/DVD Drive Installing a CD/DVD Drive Replace the computer cover Removing the Processor Processor Installing the Processor System Board Removing the System Board Jumper SettingsJumper Setting Description Replacing the System Board Power SupplyRemoving the Power Supply Replacing the Power Supply Replacing the Battery Battery Specifications Controls and Lights ConnectorsDrives Environmental PowerPhysical Overview System SetupEntering System Setup System Setup Screens COM3 System Setup OptionsPXE. When the On w/ PXE setting is active USB, Internal, or Read Only Are every day or every Monday through Friday System Password option Changing Boot Sequence for Future Boots Boot SequenceOption Settings Changing Boot Sequence for the Current Boot Clearing Cmos Settings Clearing Forgotten Passwords Back to Contents Inside View of Your Computer System Board Components Technical Overview DC Power Connector P1 Power Supply DC Connector Pin Assignments COM Pin Number Signal Name 18-AWG Wire Abbreviations and Acronyms