GLOBE TRAVELER G3 OWNER’S MANUAL | GLOBE TRAVELER G3 OWNER’S MANUAL |
SETTING ALARMS 1 THROUGH 4 continued
6.While they appear in the display use the tuning knob to set the
7.While it’s in the display use the tuning knob to set the memory page number or select no page number by selecting 00 if you want to use the last frequency that you were tuned to.
8.Skip this step if you want to use the last frequency tuned to wake to. While the page number is in the display press one of the
9.Press the PAGE/TIME button to finish the
ACTIVATING AND DEACTIVATING THE ALARMS
For an alarm to turn the radio on, it must be activated. To activate the alarm to be used, turn off the G3 and press the appropriate alarm button,
USING THE LIGHT
The light illuminates the display and buttons. Turn it on and off by pressing the LIGHT button. When using batteries the light stays on for about 6 seconds; when using an AC adapter it stays on indefinitely or until turned off.
EXTERNAL ANTENNA SOCKET
The external antenna socket is used to connect the G3 to advanced performance shortwave antennas using a 50 or
FM STEREO/MONO SELECTION
When listening to FM stations, stereo/mono is selected automatically depending on the quality of the audio from the station.
LINE-IN/OUT SOCKET
This socket provides an industry standard, fixed level audio input/output source for safely routing the G3’s audio to the
To route a
To route the audio output of your G3 to another device, turn it on, plug a 1/8 inch (3.5mm) stereo cord into the G3’s
EARPHONE SOCKET AND USING EARPHONES (not included)
Plug them into the earphone socket on the left side of the radio. Turn the volume down before wearing the earphones, then turn up the volume to your liking.
REAR FOLDING STAND
Pull the folding stand from the rear of the G3, allowing viewing at a comfortable angle.
18 | 19 |
|
|