GLOBE TRAVELER G3 OWNER’S MANUAL | GLOBE TRAVELER G3 OWNER’S MANUAL |
FEATURES
Thank you for purchasing the Globe Traveler G3. Its features and capabilities are shown below:
•
•Dual Conversion PLL Digital tuner, with digital display (LCD) showing frequency, time, sleep time and symbols for sleep timer and alarm activation
•RDS (radio data system) on FM shows frequency, call letters, artist, song title, date, messages in display when available
•Synchronous Detector with selectable
•
•700 randomly programmable memories for all frequencies
•Clock, sleep timer, alarm function
•3.5 mm headphone input (earphones not included)
•Telesccopic antenna for FM and SW reception
•Internal ferrite bar antenna for AM reception
•Power source: 4AA batteries (not included)
•Display indication: Time, frequency, stereo, sleep, alarm, lock, battery, memory page, memory, time zone,
•Speaker type: Wide range 1 x 60 mm
•External antenna jack SW, FM, Aircraft Band
•Batteries 4 x 1.5 V (LR6, AM3, AA); 4AA rechargeable
•Dimension: 6.614” x 4.13” x 1.1” and 168 x 105 x 28 mm
(W x H x D)
•Net weight: 345 g
•Accessories: owner’s manual, warranty card, protective pouch, AC adapter/charger
WHAT’S INCLUDED?
AC adapter; Carrying pouch; Carrying strap (attached); Owner’s manual
POWER SOURCES
Power the G3 by installing 4 AA alkaline, lithium or
PREVENTING BATTERY LEAKAGE
To minimize the possibility of battery acid leakage, only use high quality alkaline, lithium or rechargeable
TURNING THE G3 ON AND OFF
A quick, short press of the POWER/SLEEP button, in the upper right corner, turns it on and off. A long press, of about 2 seconds, turns it on with a sleep timer (see below).
USING THE SLEEP TIMER
The sleep timer enables the G3 to play for a specified number of minutes
1.With the G3 on or off, use the numeric keypad to enter the desired time
2.Within 3 seconds press the SLEEP button, then PAGE/TIME. The G3 plays for the specified time.
To change the sleep time:
1.Use the numeric keypad to enter a new sleep time, press the SLEEP button, then PAGE/TIME.
2.Or press the SLEEP button for two seconds to see the current sleep time, enter a new time with the numeric keypad, press SLEEP and then press PAGE/TIME.
4 | 5 |
|
|