14electrolux
Activation/deactivation of the Multitab function
To activate the Multitab function, press the Multitab button. Corresponding indicator light comes on.
To deactivate the function press the Multitab button again. Corresponding indicator light goes off.
If the drying results are not satisfac- tory we suggest that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
•The activation/deactivation of the rinse aid is only possible with the Mul- titab function active.
Activation/deactivation of the rinse aid dispenser
1.Press the on/off button. The appliance must be in setting mode.
2.Simultaneously press and hold function buttons B and C, until the lights of func- tion buttons A , B, and C start flashing.
3.Press function button B. The lights of function buttons A and C go off while the
light of function button B continues to flash. The digital displayshows the cur- rent setting.
Rinse aid dispenser deactivated 
Rinse aid dispenser activated
4.To change the setting, press function button B again, the digital display shows the new setting.
5.To memorize the operation, switch off the appliance.
If you decide to revert back to the use of individual detergents we advise that you:
1.Deactivate the multitab function.
2.Fill up the salt container and the rinse aid dispenser again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the wa- ter in your area.
5.Adjust the rinse aid dosage.
Select and start a washing programme
Important! Set the options before the start of a washing programme. When a washing programme operates, no options can be set. If it is necessary to set an option, cancel the washing programme.
Select the washing programme and de- lay start with the door slightly opened. The start of the programme or the count- down of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings.
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.
2.Check that the water tap is opened.
3.Press the on/off button. The appliance must be in setting mode.
4.Set the desired washing programme. Re- fer to 'Washing programmes' for details.
5.Close the appliance door, the pro- gramme starts automatically.
Setting and starting the programme with delay start
1.Set the washing programme. Press the delay start button until the flashing num- ber of hours for the delay start shows in the digital display. The delay indicator light comes on.
2.Close the appliance door, the countdown starts automatically.
3.The countdown will decrease with steps of 1 hour.
4.The opening of the door will interrupt the countdown. Close the door; the count- down will continue from the point at which it was interrupted.
5.Once the delay start has elapsed the pro- gramme will start automatically. Delay start indicator light goes off.
