Canon qy8-13az-000 service manual Low ink Restrictions on paper USB cable not connected

- Fill in all the circles on the Photo Index Sheet.

- Place the sheet in the correct orientation and position.

Solution

- Select Yes, and press the OK button.

=> Printing starts, and it is indicated on the LCD. - Select No, and press the OK button.

=> Printing is cancelled, and the LCD returns to the display immediately before printing was attempted.

Re-select the supported paper type and size.

Connect the USB cable, then turn on the computer.

When one or more images are selected in Layout print, and if a user tries to display the menu or sub-menu, the message is displayed.

- Select Yes, and press the OK button.

=> The image selection is cancelled, and the menu or sub-menu is displayed.

- Select No, and press the OK button.

=> The LCD returns to the display immediately before the message was displayed.

Confirm the following, then try again:

The value exceeds the number of copies you can print.

	- If images are edited on the computer, print
	them from the computer.
During selecting images or specifying the	A temporary error. After the error message is
number of copies, the total print quantity	displayed for a while, the last operation before
exceeds the prescribed value of 999.	the error is cancelled, and the total print
	quantity returns to the value before the error.

Memory card is not set. Insert the card after checking the direction.

DPOF information is not saved in the memory card.

The number of copies to print is not set. Input the number of copies.

This layout is available only for A4 or 8.5"x11"(215x279).

Settings cannot be changed when printing stickers.

No memory card is inserted in the slot.

DPOF print was selected in the menu, but no DPOF files are contained in the memory card.

Multi-photo print was attempted without specifying the print quantity (with the print quantity left "0" (zero)).

In Layout print, "Mixed 1, 2, or 3" which is available only with A4 or LTR size paper is selected, but the paper size is not set to A4 or LTR.

With Sticker print selected, the Settings button was pressed.

Set a memory card.

A temporary error. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.

A temporary error. The error message is displayed for a while, then disappears. Specify the print quantity.

A temporary error. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.

A temporary error. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.

Change the setting after removing the card.

The card is currently write-enabled. Set to read-only mode before performing operation.

The paper size is not correct. Check the page size you have set.

With a memory card inserted in the slot, change of the Read/Write attribute was attempted.

With the memory card set to the Read/write mode, Card Direct printing operation was attempted from the menu.

Non-supported size of paper for PictBridge Camera Direct printing is selected.

A temporary error. Remove the memory card, then change the Read/Write attribute.

A temporary error. Remove the memory card, change the memory card setting to Read-only, then perform Card Direct printing.

Cancel printing on the digital camera. Check the paper size, then print again.

Failed to scan Photo Index Sheet. Check the orientation, position and marking. <See manual>

The machine failed in scanning the Photo Index Press the OK button to clear the error. Sheet.

2-4. Warnings

Warning

Low ink

Restrictions on paper

USB cable not connected

Cancellation of image select information

Message on the LCD

The following ink is low. Continue? (Icon of each ink tank)

Yes No

In Camera Direct Printing, only "Yes" can be selected.

The current paper cannot be set. Change the size and type.

Connect USB cable and turn on the PC. Reset the selected photo information? Yes No

1-7