#telnet 132.25.47.146 User admin Return

Passwd Return

Return

:Admin> switchName fcsw1 :Admin> switchName Return

fcsw1

:Admin>

Return

______________________ Note _______________________

When you telnet to the switch the next time, the prompt will include the switch name, for example:

fcsw1:Admin>

6.5.2Installing and Configuring the KGPSA PCI-to-Fibre Channel Adapter Module

The following sections discuss KGPSA installation and configuration.

6.5.2.1 Installing the KGPSA PCI-to-Fibre Channel Adapter Module

To install the KGPSA-BC or KGPSA-CA PCI-to-Fibre Channel adapter modules follow these steps. For more information, see the following documentation:

KGPSA-BC PCI-to-Optical Fibre Channel Host Adapter User Guide (AA-RF2JB-TE)

64-Bit PCI-to-Fibre Channel Host Bus Adapter User Guide (AA-RKPDA-TE/173941-001)

_____________________ Caution _____________________

Static electricity can damage modules and electronic components. We recommend using a grounded antistatic wrist strap and a grounded work surface when handling modules.

1.If necessary, install the mounting bracket on the KGPSA-BC module. Place the mounting bracket tabs on the component side of the board. Insert the screws from the solder side of the board.

2.The KGPSA-BC should arrive with the gigabit link module (GLM) installed. If not, close the GLM ejector mechanism. Then, align the

6–22Using Fibre Channel Storage

Page 132
Image 132
Compaq AA-RHGWB-TE manual Installing the Kgpsa PCI-to-Fibre Channel Adapter Module, Return