Compaq AA-RHGWB-TE manual Console is in diagnostic mode

!NEWCON62	TRU64_UNIX	OTHER	1	210513	OL other	0
	HOST_ID=1000-0000-C921-086C		ADAPTER_ID=1000-0000-C921-086C
!NEWCON63	TRU64_UNIX	OTHER	1		offline	0
	HOST_ID=1000-0000-C921-0943		ADAPTER_ID=1000-0000-C921-0943
!NEWCON64	TRU64_UNIX	OTHER	1	210413	OL other	0
	HOST_ID=1000-0000-C920-EDA0		ADAPTER_ID=1000-0000-C920-EDA0
!NEWCON65	TRU64_UNIX	OTHER	2	210513	OL other	100
	HOST_ID=1000-0000-C921-086C		ADAPTER_ID=1000-0000-C921-086C
.

.

.

The following connections are shown to have nonzero offsets: !NEWCON49, !NEWCON51, !NEWCON55, !NEWCON56, !NEWCON57, !NEWCON60, !NEWCON61, and !NEWCON65

4.Set the unit offset to 0 for each connection that has a nonzero unit offset:

HSG80> SET !NEWCON49 UNIT_OFFSET = 0 HSG80> SET !NEWCON51 UNIT_OFFSET = 0 HSG80> SET !NEWCON55 UNIT_OFFSET = 0 HSG80> SET !NEWCON56 UNIT_OFFSET = 0 HSG80> SET !NEWCON57 UNIT_OFFSET = 0 HSG80> SET !NEWCON60 UNIT_OFFSET = 0 HSG80> SET !NEWCON61 UNIT_OFFSET = 0 HSG80> SET !NEWCON65 UNIT_OFFSET = 0

5.At the console of each system accessing storage units on this HSG80, follow these steps:

a.Use the wwid manager to show the Fibre Channel environment variables and determine which units are reachable by the system. This is the information the console uses, when not in wwidmgr mode, to find Fibre Channel devices:

P00>>> wwidmgr			-show ev
wwid0	133	1	WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002e
wwid1	131	1	WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002f
wwid2	132	1	WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0030
wwid3
N1	50001fe100000d64
N2
N3
N4

__________________ Note ___________________

You must set the console to diagnostic mode to use the wwidmgr command for the following AlphaServer systems: AS1200, AS4x00, AS8x00, GS60, GS60E, and GS140. Set the console to diagnostic mode as follows:

P00>>> set mode diag

Console is in diagnostic mode

Using Fibre Channel Storage 6–57