Toshiba tecra m1 manual Log Utilities Tests and Diagnostics

3.25 Log Utilities 3 Tests and Diagnostics

3.25 Log Utilities

3.25.1 Function Description

This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk or output the data to a printer. If the power switch is turned off, the error information will be lost. The error information is displayed in the following order:

1.Error count (CNT)

2.Test name (TS-NAME)

3.Subtest number (TS-NAME)

4.Pass count (PASS)

5.Error status (STS)

6.FDD/HDD or memory address (ADDR)

7.Write data (WD)

8.Read data (RD)

9.HDC status (HSTS)

10.Error status name (ERROR STATUS NAME)

3.25.2 Operations

Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format:

XXXXX ERRORS

CNT TS-NO PASS STS ADDR						WD RD HSTS			[ERROR STATUS NAME]
001	EXP01 0000		XXX 00000000			00	00	0000	FDD-WRITE PROTECTED
001	EXP03 0000		XXX 00000000			00	00	0000	FDD-TIME OUT ERROR
					Address
				Error status						HDC	status
		Pass count							Read data
	Subtest number										Error status name
	Test name							Write data

Error count

[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]

TECRA M1 Maintenance Manual (960-436) 3-67