4 Replacement Procedures 4.24 Wireless LAN Antenna/Bluetooth Antenna/Display Cover/Speaker
4.24 Wireless LAN Antenna/Bluetooth Antenna/Display Cover/Speaker Removing the Wireless LAN Antenna/Bluetooth Antenna/Display
Cover/Speaker
To remove the wireless LAN antenna/Bluetooth antenna/display cover/speaker, follow the
steps below and refer to figures 4-41 to 4-49.
NOTE: The left speaker cable and acetate tape securing the left speaker cable are
installed on the insulator depending on the type of the computer.
1. Turn the display assembly face down. Remove the acetate tape securing the right
speaker cable. Then remove the right speaker cable from the insulator. Remove the
insulator from the display assembly.
Figure 4-41 Removing the Insulator
4-74 TECRA M1 Maintenance Manual (960-436)