Toshiba tecra m1 3.19 Sound/Modem Test

3 Tests and Diagnostics 3.19 Sound/Modem Test
3.19 Sound/Modem Test
This section describes how to perform the Sound/Modem test with the test program.
CAUTION: The system is capable of producing high volume sound. When you use a
headphone, be careful to set the volume low and adjust it as necessary. Using a headphone at
full volume might damage your ears.
Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the
DIAGNOSTIC TEST PROGRAM, follow these steps:
(a) Insert the test program disk in the floppy disk drive and turn on the computer.
(The Diagnostics Disk contains the MS-DOS boot files.)
The following menu will appear:
########################################################################
#### XXXXXXXXXXX DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST) ####
########################################################################
* *
* 1 ( Microphoned Recording & play ) *
* 2 ( Sin wave ) *
* 4 ( MODEM ) *
* *
************************************************************************
....Press test number [1-4] ? _
(b) To execute the TEST, select the option number you want to execute and press Enter.
3-46 TECRA M1 Maintenance Manual (960-436)