Toshiba tecra m1 manual Removing the HDD bracket

4 Replacement Procedures 4.5 HDD

NOTE: The following steps describe how to disassemble the HDD pack; however, do not disassemble if the HDD is working properly.

5.	Place the HDD pack on a flat surface, and remove the following screws.
	• M3⋅4 FLAT screw	⋅4
6.	Remove the HDD bracket.

CAUTION: Do not apply pressure to the top or bottom of the HDD.

Figure 4-6 Removing the HDD bracket

4-16 TECRA M1 Maintenance Manual (960-436)