3.2 Executing the Diagnostic Test

3 Tests and Diagnostics

3.2Executing the Diagnostic Test

Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps:

1.Insert the Diagnostics disk in the floppy disk drive and turn on the computer while pressing U.

(The Diagnostics Disk contains the MS-DOS boot files.)

NOTE: To execute the CD-ROM or DVD-ROM test, make sure the CD-ROM and CD-ROM drive or DVD-ROM and DVD-ROM drive is installed in the computer.

The following menu will appear:

NOTE: To exit the DIAGNOSTIC TEST MENU, press Esc. If a test program is in progress, press Ctrl + Break to exit the test program, or press Ctrl + C to stop the test program.

TECRA M1 Maintenance Manual (960-436)

3-3

Page 125
Image 125
Toshiba tecra m1 manual Executing the Diagnostic Test Tests and Diagnostics