Toshiba tecra m1 manual Sub-Test

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics

3.Select the option you want to execute and press Enter. When “1-SYSTEM TEST” is selected, the following message will appear:

SYSTEM TEST XXXXXXX

XXXXDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end

[Ctrl]+[C] : key stop

SUB-TEST	:	XX	ERROR COUNT: XXXXX
PASS COUNT:		XXXXX
WRITE DATA:		XX	READ DATA	: XX
ADDRESS	:	XXXXXX	TATUS	: XXX

SUB-TEST MENU :

01 - ROM checksum

02–

03-

04– Fan ON/OFF

05– Gerserville

06- Quick charge

07- DMI read

08- DMI write

09- CPU Temperature

99- Exit to DIAGNOSTIC TEST MENU

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

4.Select the desired subtest number from the subtest menu and press Enter. The following message will appear:

TEST LOOP : YES/NO

Selecting YES increases the pass counter by one, each time the test cycle ends and restarts the test cycle.

Selecting NO returns the subtest menu to the main menu after the test is complete.

TECRA M1 Maintenance Manual (960-436) 3-5