3.14 Expansion Test | 3 Tests and Diagnostics |
3.14 Expansion Test
To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. The expansion test contains two subtests.
NOTE: To execute this subtest, the PC card wraparound connector is required.
Subtest 01 PCMCIA Wraparound
This test checks the following signal line of the PC card slot:
Address line
REG#, CE#1, CE#2 line
Data line
Speaker line
Wait line
BSY#, BVD1 line
This subtest is executed in the following order:
Sub# | Address | Good | Bad | Contents |
|
|
|
|
|
01 | 00001 | nn | xx | Address line |
| 00001 | nn | xx | REG#, CE#1, CE#2 |
|
|
|
| nn=A0, 90, 80, 00 |
02 | 00002 | ww | rr | Data line |
|
|
|
| ww=write data, rr=read data |
03 | 00003 | Speaker line | ||
|
|
|
|
|
04 | 00004 | 40,80 | xx | Wait line (40<xx<80) |
|
|
|
|
|
05 | 00005 | nn | xx | Other lines (BSY#, BVD1) |
|
|
|
| NN=21, 00 |
NOTE: When the subtest 01 is executed, the following message will appear: Test slot number select (1:slot0, 2:slot1, 0:slot0&1)?
Select the slot to test.
Subtest 03 RGB monitor ID
For this test, the computer must be in CRT mode. Connect the CRT (an RGB monitor) with the external monitor port.
TECRA M1 Maintenance Manual |
