Toshiba tecra m1 manual Be careful not to damage the TAB, Replacing Toshiba fluorescent lamp XGA

4.25 Fluorescent Lamp 4 Replacement Procedures

2.Assembling PCB-ASSY cell

1)Remove the release paper of the double-sided tape at the upper of the backlight unit.

2)Light up the backlight.

3)Make sure there is no dust, alien substance or scratch on the backlight. Then make sure there is nothing wrong with the back of cell, install the PCB-ASSY cell to the backlight unit.

NOTE: 1) When installing the PCB-ASSY cell, fit it to the left bottom corner of the backlight unit.

2) Be careful not to damage the TAB.

Figure 4-57 Replacing TOSHIBA fluorescent lamp (XGA) (7)

TECRA M1 Maintenance Manual (960-436) 4-93