Toshiba tecra m1 manual Replacement Procedures Bluetooth Module, Installing the Bluetooth Module

4 Replacement Procedures 4.14 Bluetooth Module

Installing the Bluetooth Module

To install the Bluetooth module, follow the steps below and refer to figure 4-25.

1.Connect the Bluetooth SUMI card to the connector on the Bluetooth module.

2.Connect the Bluetooth SUMI card to PJ4900 on the system board.

3.Place the Bluetooth module.

4.Secure the Bluetooth module with the following screw.

• M2⋅3 SUPER FLAT screw ⋅1

5. Connect the Bluetooth coaxial cable (brown) to the Bluetooth module.

4-48 TECRA M1 Maintenance Manual (960-436)