Toshiba tecra m1 Wireless LAN Test Atheros Tests and Diagnostics, Setting the responder machine

3.17 Wireless LAN Test (Atheros) 3 Tests and Diagnostics

Setting the responder machine

NOTE: Release the write-protection of the floppy disk for the test.

Insert a floppy disk containing the test program into the FDD for the responder machine and turn on the responder machine. The Wireless LAN test menu will appear.

###############################################################

#### Atheros WLAN sub system repair test VX.XX ####

###############################################################

*	1	.....Test PC [Initiator]	*
*			*
*	0	.....[Responder]	*
*			*
*			*

***************************************************************

....Press test number [1,0] ?

Press 0 and Enter in the responder machine. After a while, the following messages will appear. The latter message is updated ever 3 seconds.

Waiting for transmitter to ring the bell in 11a mode.

Input or output error (EIO) : rxDatBegin : nothing receive within 3000millisecs(waitTime)

The responder machine is ready for the test.

Setting the tester machine

NOTE: Release the write-protection of the floppy disk for the test.

Insert a floppy disk containing the test program into the FDD of the tester machine and turn on the tester machine. The Wireless LAN test menu will appear.

###############################################################

#### Atheros WLAN sub system repair test VX.XX ####

###############################################################

*	1	.....Test PC [Initiator]	*
*			*
*	0	.....[Responder]	*
*			*
*			*

***************************************************************

....Press test number [1,0] ?

Press 1 and Enter in the tester machine. After a while, the following message will appear:

--------------------------------------------

-	mac address check OK !!	-
-		-
-	...Press any key !!	-
-		-
-		-

--------------------------------------------

To proceed the test, press any key.

TECRA M1 Maintenance Manual (960-436) 3-43