
4.21 Display Mask | 4 Replacement Procedures |
3. Release the latches on the display mask and remove the display mask.
Figure 4-37 Removing the Display mask (2)
Installing the Display Mask
To install the display mask, follow the steps below and refer to figures
1.Install the display mask on the LCD module.
2.Fasten the latches of the display mask.
3.Secure the display mask with the following screws.
• M2.5⋅6 FLAT HEAD screw | ⋅2 |
4. Stick the two mask seals on the top of screws.
TECRA M1 Maintenance Manual |