4 Replacement Procedures 4.24 Wireless LAN Antenna/Bluetooth Antenna/Display Cover/Speaker
4-84 TECRA M1 Maintenance Manual (960-436)
7. Install the display cover to the display assembly. Pass the LCD cable through the hole
from the front of the display assembly toward the bottom. Secure the two hinges on
the display assembly to the display cover with the following screws.
• M2.5×5 FLAT HEAD screw ×2
8. Pass the wireless LAN cables, Bluetooth cable (for wireless LAN/Bluetooth models
only) and internal microphone cable through the hole from the front toward the back
of the display assembly.
9. Hook the wireless LAN cables, Bluetooth cable (for wireless LAN/Bluetooth models
only) and internal microphone cable on the guides on the back of the display
assembly. Stick the two acetate tapes on these cables.
10. Install the cable holder on the wireless LAN antenna cables, Bluetooth antenna cable
(for wireless LAN/Bluetooth models only), internal microphone cable. Secure the
holder with the following screws.
• M2.5×4 TAPPING screw ×2
11. Install the insulator to cover the back of the display assembly. Pass the right speaker
cable through the guides of the insulator.
NOTE: The left speaker cable and acetate tape securing the left speaker cable are
installed on the insulator depending on the type of the computer.