Toshiba tecra m1 - page 274

4 Replacement Procedures 4.16 LED Board
Installing the LED Board
To install the LED board, follow the steps below and refer to figure 4-29.
1. Connect the LED board SUMI card to PJ3100 on the LED board.
2. Place the LED board and secure it with the following screws.
• M2.5×4 FLAT HEAD screws ×2
3. Connect the LED board SUMI card to PJ1101 on the system board.
4. Stick the glass tape to secure the LED board SUMI card and USB cable.
4-54 TECRA M1 Maintenance Manual (960-436)