4.5 HDD 4 Replacement Procedures
Installing the HDD
To install the HDD, follow the steps below and refer to figures 4-4 to 4-6.
CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the
HDD.
1. Seat the HDD in the bracket.
2. Secure the HDD to the HDD bracket with the following screws.
• M3×4 FLAT screw ×4
CAUTION: Do not apply pressure to the middle of the HDD pack. It may
damage the HDD pack. Hold the HDD pack by its corners.
3. Hold the HDD pack by its corners and place it in the dent. Slide the HDD pack to the
connector of the computer to connect. Press to ensure a firm connection.
4. Fold the guide not to cover the screw hole on the HDD cover. Seat the HDD cover
and secure it with the following screw.
• M2.5×4 FLAT HEAD screw ×1
TECRA M1 Maintenance Manual (960-436) 4-17