Toshiba tecra m1 - page 315

4.25 Fluorescent Lamp 4 Replacement Procedures
4. Setting bezel
1) Hook the bezel on the five latches of the frame from the upper side.
NOTE: 1) Make sure the GND-CU on the left side and lamp reflector shall be
inside the bezel.
2) Be careful not to damage the TAB.
3) Make sure the five latches of the upper side of bezel are hooked on.
Figure 4-59 Replacing TOSHIBA fluorescent lamp (XGA) (9)
TECRA M1 Maintenance Manual (960-436) 4-95