
System Response | Action |
|
|
The Missing Resource menu is displayed. | Follow the displayed instructions until either the |
| Diagnostic Mode Selection menu or an SRN is |
| displayed. |
| If the Diagnostic Mode Selection menu is |
| displayed, select Problem Determination and go |
| to ªStep 12º. |
| If you get an SRN, record it, and go to ªStep |
| 14º on page 154. |
|
|
The New Resource menu is displayed. | Follow the displayed instructions. |
| Note: Devices attached to serial ports S1 or |
| S2 do not appear on the New Resource menu. |
| Also, ISA adapters do not appear unless they |
| have been identified and configured. |
| If the Diagnostic Mode Selection menu is |
| displayed, select Problem Determination and go |
| to ªStep 12º. |
| If you get an SRN, record it, and go to ªStep |
| 14º on page 154. |
| If you do not get an SRN, go to ªStep 17º on |
| page 155. |
|
|
The system does not respond to selecting | Go to ªStep 10º on page 152. |
diagnostics. |
|
|
|
Step 12
Did the Diagnostic Selection Menu display?
NOIf Problem Determination was selected from the Diagnostic Mode Selection menu, and if a recent error has been logged in the error log, the diagnostics automatically begin testing the resource.
Follow the displayed instructions.
vIf the No Trouble Found screen is displayed, press Enter.
vIf another resource is tested, repeat this step.
vIf the Diagnostic Selection menu is displayed, go to ªStep 13º.
vIf an SRN is displayed, record it, and go to ªStep 14º on page 154.
YES | Go to ªStep 13º. |
Step 13
The All Resources option checks most of the configured adapters and devices.
Chapter 8. Hardware Problem Determination 153