IBM RS/6000 44P manual Sample File modemf0.cfg

timeout 60

	done
page:	send "ATDT%N,,,,%R;\r"	# %N = pager call center number
		# Add enough commas to wait for
		# time to enter paging number.
		# %R = paging number
	expect "0\r" timeout 60	# Confirm successful command.
	delay 2	# Wait before hanging up.
	send "ATH0T\r"		# Hang up.
	expect "0\r" timeout 2	# Confirm successful command.
	done
ripo:	send "AT&FQ0T\r"	# Reset to factory defaults.
	ignore "0\r" or "OK\r\n" timeout 2	# Ignore modem response.
	send "ATE0T\r"	# Initialize modem: Echo OFF,
	expect "0\r" or "OK\r\n" timeout 2	#	Enable responses (Numeric),
	send "ATQ0V0X0T\r"	#	Limit response codes.
	expect "0\r" timeout 2	# Confirm commands successful.
	send "ATS0=0\r"	# Set AutoAnswer OFF
	expect "0\r" timeout 2	# Confirm command successful.
	send "AT&C1&D2\r"	# Detect carrier and DTR.
	expect "0\r" timeout 2	# Confirm command successful.
	done	# RI Power On enabled.
error:		# Handle unexpected modem
		#	responses.

expect "8\r" or "7\r" or "6\r" or "4\r" or "3\r" delay 2

done

Sample File modem_f0.cfg

#

#COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP F0

#FUNCTIONS: Modem configuration file for many recent Hayes* compatible modems.

#This example uses the AT&F0 reset command to choose the factory defaults.

#This set up is preferred for modems with extended (&) commands. For early

#vintage modems, setup Z or Z0 is recommended. If your modem responds to

#the extended (&) commands and to factory default choices (&Fn), but doesn©t

#work properly with this setup file, setup F1 is recommended.

#

#* Trademark of Hayes Microcomputer Products, Inc.

#(C) COPYRIGHT International Business Machines Corp. 1996

#All Rights Reserved

#Licensed Materials - Property of IBM

#

#US Government Users Restricted Rights - Use, duplication or

#disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

#If the modem has configuration switches, they should be set to the

18444P Series Model 170 User's Guide