| ignore "0\r" or "OK\r\n" timeout 2 | # Ignore modem response. | |
| send "ATE0T\r" | # Initialize modem: Echo OFF, | |
| expect "0\r" or "OK\r\n" timeout 2 | # | Enable responses (Numeric), |
| send "ATQ0V0X0T\r" | # | Limit response codes. |
| expect "0\r" timeout 2 | # Confirm commands successful. | |
| send "ATS0=0\r" | # Set AutoAnswer OFF | |
| expect "0\r" timeout 2 | # Confirm command successful. | |
| send "AT&C1&D2\r" | # Detect carrier and DTR. | |
| expect "0\r" timeout 2 | # Confirm command successful. | |
| done |
|
|
connect: | send "ATDT%N\r" | # Tone dialing command. | |
|
| # %N from Call Home setup. | |
# Expect a connection response.
expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r" busy "7\r" timeout 60
done
retry: | send "A/" | # Repeat the previous command. |
# Expect a connection response.
expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r" busy "7\r" timeout 60
| done |
|
|
|
disconnect: |
|
|
| |
| delay 2 | # Separate from previous data. | ||
| send | "+++" | # Assure command mode. | |
| delay 2 | # Allow mode switching delay. | ||
| send | "ATH0T\r" | # Set modem | |
|
|
| # | (i.e., hang up). |
| ignore "0\r" or "OK\r" timeout 2 | # Ignore modem response. | ||
| send | "ATE0Q1\r" | # Initialize modem: Echo OFF, | |
| ignore "0\r" timeout 1 | # | Disable responses. | |
|
|
| ||
| done |
|
|
|
condin: | send | "AT&FQ0T\r" | # Reset to factory defaults. | |
| ignore "0\r" or "OK\r\n" timeout 2 | # Ignore modem response. | ||
| send | "ATE0T\r" | # Initialize modem: Echo OFF, | |
| expect "0\r" or "OK\r\n" timeout 2 | # | Enable responses (Numeric), | |
| send | "ATQ0V0X0T\r" | # | Limit response codes. |
| expect "0\r" timeout 2 | # Confirm commands successful. | ||
| send | "ATS0=2\r" | # Set AutoAnswer ON | |
| expect "0\r" timeout 2 | # Confirm command successful. | ||
| send | "AT&C1&D2\r" | # Detect carrier and DTR. | |
| expect "0\r" timeout 2 | # Confirm command successful. | ||
| done |
|
|
|
waitcall: ignore | "2\r" timeout 1 | # Ignore first ring. | ||
| expect | "2\r" timeout 10 | # Pick up second ring | |
|
|
| # | or timeout. |
|
|
| # Expect a connection response. | |
expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r"
