error: | # Handle unexpected modem |
| # responses. |
| expect "8\r" or "7\r" or "6\r" or "4\r" or "3\r" |
| delay 2 |
| done |
Sample File modem_f.cfg
#
#COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP F
#FUNCTIONS: Modem configuration file for many recent Hayes* compatible modems.
#This example uses the AT&F reset command to choose the factory defaults.
#This set up is preferred for modems with extended (&) commands. For early
#vintage modems, setup Z or Z0 is recommended. If your modem responds to
#the extended (&) commands and to factory default choices (&Fn), setup file
#F0 or F1 is recommended.
#
#* Trademark of Hayes Microcomputer Products, Inc.
#(C) COPYRIGHT International Business Machines Corp. 1996
#All Rights Reserved
#Licensed Materials - Property of IBM
#
#US Government Users Restricted Rights - Use, duplication or
#disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#If the modem has configuration switches, they should be set to the
#factory default settings.
ICDelay 1 |
|
| ||
DefaultTO 10 |
|
| ||
CallDelay 120 |
|
| ||
# | AT | Attention Code | , | Inserts delay in dialing commands |
# | &F | Reset to default profile | Q0 | Turn on responses |
# | E0 | Turn echo off | Q1 | Turn off responses |
# | V0 | Use numeric responses | S0=0 | Automatic answer inhibit |
# +++ | Escape to command mode | S0=2 | Answer on second ring | |
# | H0 | X0=0 | Limit modem response codes | |
# |
|
| T = | Tone mode. When used as T\r, it is a |
# |
|
|
| no op to maintain program synchronization |
# |
|
|
| when modem may/will echo the commands. |
# |
|
|
|
|
# &C1 | Detect CD | &D2 | Respond to DTR (often the default) | |
# |
|
|
|
|
# | %N | %P | Paging phone number |
#%S Modem speed (available to users)
#Following are common responses from a wide range of modems:
#16, 15, 12, 10, 5 and 1 are connection responses. Add others as required.
#7=busy; 6=no dial tone; 4=error; 3=no carrier; 2=ring; 0=OK
#
# PROGRAMMING NOTE: No blanks between double quote marks (").
condout: | send "AT&FQ0T\r" | # Reset to factory defaults. |
18244P Series Model 170 User's Guide