IP Parameters |
| ||
1. | Client IP Address | [000.000.000.000] | |
2. | Server | IP Address | [000.000.000.000] |
3. | Gateway IP Address | [000.000.000.000] | |
4. | Subnet | Mask | [255.255.255.000] |
X=Exit
===>
To change IP Parameters, type the number of the parameters for which you want to change the value.
Attention: If the client system and the server are on the same subnet, set the gateway IP address to [0.0.0.0].
Selecting the Adapter Parameters option allows you to view an adapter's hardware address, as well as configure network adapters that require setup. A screen similar to the following displays.
Device | Slot | Hardware Address | |
1. | ethernet | 3 | 0004AC5E08D2 |
2. | 5 | 0020357A0530 | |
3. | ethernet | Integrated | 0004ACE4020B |
. | |
X=Exit | |
© | |
(Press enter after making selection) | ===> |
Selecting an adapter on this screen displays configuration menus for that adapter:
