IBM RS/6000 44P manual Set Password and Unattended Start Mode, 98 44P Series Model 170 Users Guide

Configure Nth Boot Device
Device	Current	Device
Number	Position	Name
1	1	Diskette
2	2	Ethernet
3	3	SCSI CD-ROM
4	4	SCSI 4.5GB Hard Disk
5	-

.------.

X=Exit ¢------©

===>

Type the device number of the device name that you want to select as the Nth boot device. For example, if you entered this menu by selecting 4 on the previous menu (configure 2nd Boot Device), then enter the number 3 based on the list shown above. You are thus selecting the SCSI CD-ROM device to be the 2nd (Nth) device in the boot sequence.

Utilities

The Utilities screen enables you to select from the following system management tools.

Utilities

1 Set Passwords and Unattended Start Mode

2 SCSI Spin up

3 Display Error Log

4 Remote Initial Program Load Setup

5 Change SCSI id

6 Update System Firmware

7 Update Service Processor Firmware

8 Select Console

.------.

X=Exit ¢------©

===>

Set Password and Unattended Start Mode

Entering this selection permits access to the following options.

9844P Series Model 170 User's Guide