The user can also override the choices in the Boot Mode Menu while the system initialization indicators display on the screen. For example, if the user had enabled the system to enter the SMS menus (option 1) but pressed the 8 key while the system initialization indicators displayed on the screen, the system would enter the Open Firmware prompt and disregards the settings in the Boot Mode Menu.

After the logo displays, the initialization icons display across the bottom of the screen.

vRing Indicate Power-On Menu

Ring Indicate Power-On is an alternate method of dialing in, without establishing a service processor session. If the system is powered off and Ring Indicate Power-On is enabled, the server is powered on at the predetermined number of rings, If the server is already on, no action is taken. In either case, the telephone call is not answered. The caller receives no feedback that the server is powered on. The Ring Indicate Power-On Menu and defaults are shown below:

Ring Indicate Power-On Menu

1.Ring indicate power-on: Currently Disabled

2.Number of rings: Currently 6

98. Return to Previous Menu

The number of rings can be set to any number greater than zero.

vReboot/Restart Policy Setup Menu, see ªReboot/Restart Policy Setup Menuº on page 59.

vPower-On System

Allows immediate power-on of the system. For other power-on methods, see ªSystem Power-On Methodsº on page 61.

vPower-Off System

Allows the user to power-off the server following a surveillance failure.

System Information Menu

This menu provides access to system configuration information, error logs, system resources, and processor configuration.

5044P Series Model 170 User's Guide

Page 68
Image 68
IBM RS/6000 44P manual System Information Menu, Ring Indicate Power-On Menu, Power-Off System