IBM RS/6000 44P manual 167

Appendix D. General Attributes Required When Using a TTY Terminal

The following general attributes are the default settings for the diagnostic programs. Be sure your terminal is set to these attributes.

Note: Set these attributes before the diagnostic programs are loaded.

General Setup	3151	3151	3161 /3164	Description
Attributes	/11/31/41	/51/61	Settings
	Settings	Settings
Machine mode	3151	3151 PC	3161 or	The diagnostic programs are set
			3164	to emulate use of the 3161 ASCII
				Display Terminal. If your terminal
				can emulate a 5085, 3161 or
				3164 terminal, use these attribute
				settings. Otherwise, refer to your
				operator's manual, compare the
				attribute descriptions with those
				of your terminal, and set your
				attributes accordingly.
Generated Code Set		ASCII
Screen	Normal	Normal		Uses the EIA-232 interface
				protocol.
Row and Column	24 x 80	24 x 80		Uses the EIA-232 interface
				protocol.
Scroll	Jump	Jump	Jump	When the last character on the
				bottom line is entered, the screen
				moves down one line.
Auto LF	Off	Off	Off	For the ²On² setting, pressing the
				Return key moves the cursor to
				the first character position of the
				next line. For the ²Off² setting,
				pressing the Return key moves
				the cursor to the first character
				position of the current line. The
				CR and LF characters are
				generated by the New line
				setting.
CRT saver	Off	Off	10	The ²10² setting causes the
				display screen to go blank if there
				is no activity for 10 minutes.
				When the system unit sends data
				or a key is pressed, the screen
				contents display again.

167