Utilities: Enables you to set and remove passwords,
enable the unattended start mode, set and view the
addresses of your system’s SCSI controllers, select the
active console, view or clear the firmware error log, and
update your system unit’s firmware program. Go to
“Utilities” on page 79.
Exit: Returns you to the previous screen.
Toselect an icon, move the cursor with the arrow keys to choose which icon is
highlighted, then press the Enter key. Youcan also select an icon by clicking on it with
your left mouse button. Toleave the current screen, either press the Esc key or select
the Exit icon.
Config
By selecting this icon, you can view information about the setup of your system unit. A
list similar to the following displays when you select the Config icon.
Chapter 4. System Management Services 75