<Configuration>

ethernet, slot #=3

ethernet, (Integrated)

OKExit

SCSI ID

Select this icon to view and change the addresses (IDs) of the SCSI controllers attached to your system unit. To change a SCSI controller ID, highlight the entry by moving the up or down arrow keys, then use the spacebar to scroll through available IDs. After you have entered the new address, use the left or right arrow keys or mouse to highlight the Save icon and press Enter.

At any time in this process, you can select the Default icon to change the SCSI IDs to the default value of 7.

Chapter 4. System Management Services 91

Page 109
Image 109
IBM RS/6000 44P manual OKExit