Device | Slot | Hardware Address | |
1. | ethernet | 3 | 0004AC5E08D2 |
2. | 5 | 0020357A0530 | |
3. | ethernet Integrated |
| 0004ACE4020B |
. | |
X=Exit | |
© | |
(Press enter after making selection) | ===> |
After choosing which adapter to use to ping the remote system, you must provide the addresses needed to communicate with the remote system.
Ping IP Address |
| |||
1. | Client IP | Address | [129.132.4.20] | |
2. | Server | IP | Address | [129.132.4.10] |
3. | Gateway IP Address | [129.132.4.30] | ||
4. | Subnet | Mask | [255.255.255.0] | |
. | . | ||
E=Execute | X=Exit | ||
© | © | ||
===>
Change SCSI ID
This option allow you to view and change the addresses of the SCSI controllers attached to your system unit.
Update System or Service Processor Firmware
These options allow you to update your system or service processor firmware from an image on a 3.5 inch diskette. Note that you must insert a diskette containing the firmware update image after you see a confirmation screen.
To update system and service processor firmware, use Diagnostics Service Aid under AIX. To obtain firmware updates, as well as update instructions, see the following Web address: http://www.rs6000.ibm.com/support/micro.
If you are not able to obtain firmware updates or instructions from this Web address, contact your Service representative for assistance.
