Samsung WAM270/EN manual Wireless router or HUB, After you turn it on? Wi-Fi, Same Wi-Fi network

Symptom	Check	Remedy
HUB doesn't work properly	•• Is the HUB plugged in?	•• Plug in the HUB.
	•• Is the LAN cable connected to	•• Connect the LAN cable to the
	the wireless router and the HUB	ETHERNET SWITCH on the back
	properly?	of the HUB and to your wireless
	•• When the Hub is plugged in, do	router.
	the HUB's front indicators show	•• Reset the HUB (see page 66).
	it's operating properly?	Press here
		•• If you experience troubles with
		connecting the HUB and Link
		Mate, try relocating the Link Mate
		so that the Link Mate is closer to
		the wireless router or HUB.
Link Mate doesn't work properly	•• Is the Link Mate plugged in?	•• Plug in the Link Mate.
	•• Does the Link Mate's top LED	•• Check whether the Wi-Fi router
	indicator remain red 5 minutes	you're using had been certified for
	after you turn it on?	Wi-Fi.
		•• Unplug the Link Mate, plug it back
		in, and then reconnect it to the
		router.
		•• Reset the Link Mate (see page
		66). Press here
		•• If used with a HUB
		-- Make sure the smart device and
		the HUB are connected to the
		same Wi-Fi network.
		-- Make sure the HUB's indicator
		LED's show that it is working
		correctly. (See page 14, item 3.)
		Press here
		-- If the problem persists, reset the
		HUB (see page 66). Press here
		-- Unplug, then plug in the HUB.
		Then, unplug and plug in the
		Link Mate.
		-- If you experience troubles with
		connecting the HUB and Link
		Mate, try relocating the Link
		Mate so that the Link Mate is
		closer to the wireless router or
		HUB.
	4444
	69